NiMAR is shipping two housings for the Canon EOS RP mirrorless camera. The N3D polycarbonate housing has a port for NIM-108 ports and ships with an LED flash trigger. The Surf Base housing has two button pistol grip control for surf and watersports photography.

Both housings for the EOS RP are shipping now, with the N3D priced at €999, and the Surf Base housings at €799.

NiMar N3D Underwater housing for Canon EOS RP mirrorless camera

SPECS

• Depth Rating: 197ft (60m)
• Made from corrosion-resistant Bayer Makrolon polycarbonate, clear in the back to allow you to monitor camera and waterproof seal
• Mechanical controls shown: All

• 4xLatches with safety clips: Aisi 316 stainless steel
• Accepts optional, interchangeable bayonet-mount ports NIM-108 (EOSRP) for a broad array of wide-angle, fisheye, macro, and zoom lenses

• Led Flash Trigger
• Vacuum Port for optional Vacuum System

• Removable optical viewfinder
• Moisture alarm alerts you in the unlikely event of a breach in the waterproof seal, giving you time to prevent damage to your camera and lens
• Buoyancy: Slightly positive, Actual buoyancy may vary depending on the choice of lens and port
• Dual ergonomic grip handles offering improved balance and T-mounts for connecting optional lighting arms
• Limited 2-Year Warranty

DIMENSIONS

Overall dimensions w/handles, eyepiece and eyepiece guard: 13.39”x6.69”x5.90 (34x17x15cm)
Weight with grip handles: 5.35lb (2.43kg)

IN THE BOX WITH HOUSING

2xRemovable side grip handles with aisi 316 s/s fastening eyelet
Spare main seal
Rubber eyepiece guard
Bayonet protective cover
Soft bag
Protective rubber tips for controls
Tool kit
Silicon grease
Camera insert slide
Silica gel bag
Test certificate and warranty
Quick start guide

NiMar Surf Base housing for Canon EOS RP mirrorless camera

The Water Sports line is designed to be used on the water surface for water sports like surf, windsurf, sup, triathlon, etc.

The Base Water Sports Housing has been designed to be used exclusively with the 2 Button Pistol Grip Trigger.

The 2 Button Pistol Grip allows for dedicated focus control and shutter control independently. Rest of controls must be preset or set to Auto mode before the camera is put into housing. Shutter speed, action pace are the main features of this product: you’ll never miss the crucial moment.

The housing is made of polycarbonate, and it is waterproof thanks to 4 stainless steel AISI 316 hooks with a safety clip. The serial case is then equipped for the installation of a flash sync connector (to grant the use of external flash units).

SPECS

• Body made of corrosion-resistant Bayer Makrolon polycarbonate, which is transparent to allow you to maintain a full view of the camera and monitor waterproof seal
• Depth Rating: 98ft (30m)
• Set-up in water: positive
• Interchangeable Lens Port System NIM108-WS
• 4 Aisi 316 S/S fasteners with a clip catch
• Control Type: 2-Button Pistol Grip Trigger. Rest of controls must be preset or set to Auto mode before the camera is put into housing

• Moisture alarm alerts you in the unlikely event of a breach in the waterproof seal, giving you time to prevent damage to your camera and lens
• Limited 2-Year Warranty

DIMENSIONS

Overall dimensions: L. 22cm(8.66”) H.30cm(11.8”) D.12cm(4.7”)
Weight: 1.90kg (4,1lb)

IN THE BOX WITH THE HOUSING

Spare main seal
Bayonet protective cover
Silicon grease
Camera insert slide
Silica gel bag
Test certificate and warranty
User manual

ATTENTION:

THIS HOUSING REQUIRES THE ADDITION OF A COMPATIBLE LENS PORT SYSTEM FOR WATERPROOF OPERATION
See NIM-108WS(EOSR) Port Chart